P11 Alloy Steel Pipe

 

This ASTM A335 specification covers nominal wall and minimum wall seamless ferritic alloy-steel pipe intended for high­temperature service. Pipe ordered to this specification shall be suitable for bending, flanging , and similar forming operations, and for fusion welding. Selection will depend upon design, service conditions, mechanical properties, and high-temperature characteristics.

 

 

 

 

Composition, %
Grade	C	Mn	P	S	Si	Cr	Mo
P11	0.05-0.15	0.30-0.60	0.025max	0.025max	0.50-1.00	1.00-1.50	0.44-0.65

 

 

Grade	Tensile strength Min Ksi(Mpa)	Yield strength Min Ksi(Mpa)	Elongation Requirement % min
P11	60(415)	30(205)	22

 

 

For steel pipe packaging, plastic pipe caps are necessary. For small-size steel pipes, we generally use wooden boxes for packaging. For large-size steel pipes, we generally use bundled or bare packaging, but the surface must be covered with woven bags.

 

 

1.We will confirm all parameters before quoting, so that you can get an accurate quotation.
2.In order to ensure product quality, we can invite third-party organizations to test products.
3.We provide safe and complete packaging services to avoid loss of goods during transportation, especially for ocean transportation.
4.If the customer has any objection to the product quality, we will send professional technicians to communicate with you. If it is confirmed that the product quality is not up to standard caused by us, we will discuss compensation with you.

 

If you need ASTM A335 P11 alloy steel pipe, please feel free to contact us.
Email: johnny@yqpipeline.com
WhatsApp: +86 15632733100

Tel: +86 317 6376727

 

http://www.yqsteelpipe.com/